Smart Charger DC 29V 15A  435W  for LiFePO4 Battery Pack 25.6V 8S with Optional Connectors

---

Parameters

Descriptions	This charger is power factor corrected, which exhibit high efficiency Has CAN communication or digital alarm output. Interfaces with BMS Management System via CAN Communication or 2 x 12V digital alarm output . Suitable for 8-cell pack (connected in series) . Fan cooled . Power Factor: > 0.75 Efficiency: > 72% For Battery capacity ≥40Ah
Input	96 to 260 VAC, 40~60Hz
Output	28.4V / 15A DC
Connector	4′ long 8AWG wire with SB50A connector
Protection	Overload protection Over-voltage protection Over-heating protection Short circuit protection Reverse polarity protection
LED Indicator	Initial: All 6 LED indicator “Flashing” for 5 sec Ready to charge/ Wrong polarity connection: 1st green LED = Solid green, Red LED = “Flashing Red” Perform Charging/ Correct Polarity connection: 1st green LED = “Flashing Green”, Red LED = “Off” (Cooling Fan turn on) 20% full charge: 1st green LED = “Solid Green”, 2nd green LED = “Flashing Green”, Red LED = “Off” 40% full charge: 1st & 2nd green LED = “Solid Green”,  3rd green LED = “Flashing Green”,  Red LED = “Off” 60% full charge: 1st  & 2nd & 3rd green LED = “Solid Green” , 4th green LED = “Flashing Green”, Red LED = “Off” 80% full charge: 1st & 2nd & 3rd  & 4th green LED = “Solid Green”, 5th green LED = “Flashing Green”, Red LED = “Off” 100% full charge: 1st & 2nd & 3rd & 4th &5th green LED = “Solid Green”,Red LED = “Off”
Dimension	214mm(8.5″) x 120mm(4.7″) x 65mm(2.6″)
Weight	3.0 lbs 8.8Oz (1610 grams)

---