Protection Circuit Module (PCM) with Balance Function for LiFePO4 Battery Pack 4 Series Connection 12.8V at 100A limited
|Protection Circuit Module Specifications For 12.8V LiFePO4 Battery Pack|
|Model：PCM-LFP-S4A100B 12.8V 100A|
|Over-charge protection voltage||15.60 V±25 mV|
|Over-discharge protection voltage||2.0±0.05V|
|Over-current protection||350±10A *peak current less than 5 seconds, optional|
|Maximal continuous Discharging current||100A * constant working current|
|Maximal Current consumption||≤20uA|
|Short circuit protection||Automatic Recovery|
|Protection circuitry resistance (B- TO P-)||≤20mΩ|
|Dimension||220mm (8.66″) x 205mm (8.07″) x 35mm (1.38″)|
|Weight||545 grams (19.3 Oz)|
|B+/P-||B+/P- = Charge+/-, Discharge +/-|
- The PCM is specially designed for LiFePo4 4S 12.8V with 100A discharging rate. It’s different from others, whose balance function is set to ensure battery fully charged and safety.
- PCM will detect each cell’s voltage and trim higher voltage down until other cells reach the same voltage level. Therefore, it helps batteries have longer service life.
- In case of high constant current more than 10A, it’s strongly recommended that additional protection components to ensure safety, for example, polyswitch, NTC, fuse,etc.
- The safety PCM is specially designed for professionals. Mis-understanding and abuse use may cause battery damaged or overheated, even exploded.