Protection Circuit Module (PCM) for LiFePO4 Battery Pack 4 Series Connection 12.8V 60A limited
|Protection Circuit Module Specifications For 12.8V LiFePO4 Battery Pack|
|Model：PCM-LFP-S4A60 12.8V 60A limited|
|Over-charge protection voltage||15.60 V±25 mV|
|Over-discharge protection voltage||2.3±0.08V|
|Over-current protection||180± 5A * optional|
|Maximal continuous Discharging current||60A|
|Maximal Current consumption||≤20uA|
|Short circuit protection||Automatic Recovery|
|Protection circuitry resistance (B- TO P-)||≤30mΩ|
|Dimension||140mm(5.51″) x 60mm(2.4″) x 6mm(0.24″)|
|Weight||55 grams (1.94 Oz)|
|P+/P-||P+ = Charge+ / Discharge +
P- = Charge- / Discharge –
- The PCM is specially designed for LiFePo4 4S 12.8V with 60A discharging rate. It’s different from others, whose balance function is set to ensure battery fully charged and safety.
- PCM will detect each cell’s voltage and trim higher voltage down until other cells reach the same voltage level. Therefore, it helps batteries have longer service life.
- In case of high constant current more than 10A, it’s strongly recommended that additional protection components to ensure safety, for example, polyswitch, NTC, fuse,etc.
- The safety PCM is specially designed for professionals. Mis-understanding and abuse use may cause battery damaged or overheated, even exploded.