Protection Circuit Module (PCM) with Balance Function for 2 cells (6.4V) LiFePO4 Battery Pack at 7A limite
Parameters
Protection Circuit Module for 6.4V LiFePO4 Battery Pack * Li-Ion 7.2V/7.4V optional | |
Model: PCM-S2A7 6.4V7A with balance function | |
Over-charge protection voltage of single cell | 3.90±0.025V |
Over-discharge protection voltage of single cell | 2.00±0.05V |
Over-current detection protection | 17±3A *peak current |
Maximal continuous Discharging current | 7A constant current |
Maximal Current consumption | 25uA |
Protection circuitry resistance (B- TO P-) | ≤30mΩ |
Dimension | 40mm(1.6″) x 18mm(0.7″) x 3.0mm(0.1″) |
Weight | 0.3Oz (8.5 grams) |
P+/P-/BM | P+ = Charge+ / Discharge + P- = Charge- / Discharge – BM = Battery Common |
Remarks:
The PCM is specially designed for 6.4V* Li-Ion Battery pack with 7A discharging rate. It’s different from other PCB, whose balance function is built-in after battery pack fully be charged. PCM detects each voltage and trim higher voltage down until other cells reach the same voltage level. Therefore, it helps Li-Ion cells have longer service life and stable performance.